Overview
Ronseal Ultimate Protection Decking Paint will rejuvenate all ages and types of decking. This product is great for use on older decks as not only does it offer all weather protection but fills minor cracks and locks down splinters. It’s formulated to offer advanced UV protection and cover greying wood.
- Advanced UV protection
- Brings old decks back to life
- Fills cracks and lockdowns splinters
| Area | Exterior |
| Base | Water-Based |
| Coverage | 10m² per litre |
| Drying Time | 48 Hours |
| Re-Coat Time | 4 Hours |
| Recommended Coats | 2 Coats |
| Application Method | Brush |
Preparation
Always ensure the surface to be treated is clean, dry and free from any dust, algae, fungi or moss.
- To clean decking give it a good brush with a stiff broom to remove any dirt, debris or loose wood.
- Check the surface of the decking for loose screws or boards and ensure these are tightened.
- If your decking has been effected by algae, fungi or mould it can be cleaned with .
Note: Most new decks come with a bit of waterproofing protection. This could stop the paint from sticking. To avoid this, give your new deck a good scrub with . Alternatively, leave it to weather for six months.
Application
We recommend you stir the product and test a small are to ensure you are happy with adhesion and colour.
- Apply in temperatures above 10°C and when bad weather is not forecast.
- Thoroughly mix the paint and ensure to mix throughout to ensure consistency in colour.
- Using a brush start from one corner and start to brush along the length of the boards.
- Working on 3-4 boards at a time to avoid overlap marks.
- Leave 4 hours, then apply a second coat.
- Allow to dry for 48 hours before use.
- For strong colours more coats may be needed.
- If using more than one tin it’s advisable to mix together in a large container or finish in a corner before starting a new can to ensure consistency in colour.
Note: Always follow the manufacturer instructions found on the tin.
